3′ X 5′ GREASE INTERCEPTOR

Fats, Oils and Grease (FOG) are generated at food service establishments (FSEs) as a byproduct of food preparation activities. When FOG enters the sewer system it begins to cool and solidify, reducing conveyance capacity and blocking flow. Often time this leads to sewer overflows and spills which put the health and safety of the public at risk. Grease interceptors have played an important role in preventing accumulated FOG from damaging the public infrastructure by collecting it at the source. Grease interceptors, when combined with Best Management Practices (BMPs), will significantly reduce the amount of FOG entering the sewer system.

• Modular Construction
• Modular Construction Base/Bottom Section
• Base/Bottom Section Sludge weirs, Oil weirs, and Outlet weirs
• Sludge weirs, Oil weirs, and Outlet weirs Lids and Top Sections
• Lids and Top Sections Riser Sections
• Riser Sections Frames and Covers
• Frames and Covers Embedded Lifters
• Embedded Lifters Grade Rings and Risers
• Grade Rings and Risers Knock-outs and Block-outs
• Knock-outs and Block-outs “FACET” M-Pac Coalescing Media
• “FACET” M-Pac Coalescing Media

• Rugged durability to efficiently slow down the flow of waste water and remove oil byproducts before flowing into a sanitary sewer system
• Customizable sectional design
• Quick and easy install
• Rugged durability to efficiently slow down the flow of waste water and remove oil byproducts before flowing into a sanitary sewer system
• Customizable sectional design
• Quick and easy install Sturdy five-sided watertight design
• Customizable with special accesses, block-outs, and knock-outs
• Variety of shapes and sizes available
• Sturdy five-sided watertight design
• Customizable with special accesses, block-outs, and knock-outs
• Variety of shapes and sizes available Precast weirs are fitted in the base section
• Create the barrier to capture byproducts
• Your project requirements will determine the number of weirs installed
• Precast weirs are fitted in the base section
• Create the barrier to capture byproducts
• Your project requirements will determine the number of weirs installed Cover and protect
• Maintenance and inspection accessibility
• Variety of shapes and sizes
• Variable access opening sizes and locations offered
• Cover and protect
• Maintenance and inspection accessibility
• Variety of shapes and sizes
• Variable access opening sizes and locations offered Elevate access to accommodate for varied depths
• Variety of sizes available
• Elevate access to accommodate for varied depths
• Variety of sizes available Variety of sizes and shapes
• Rectangular frames and galvanized covers or manhole frames with cast or ductile iron covers
• Variety of sizes and shapes
• Rectangular frames and galvanized covers or manhole frames with cast or ductile iron covers Allow for easy install
• Galvanized steel material
• 2, 4, 8, and 20 ton loading capabilities
• 1 ton universal lifters also available
• Allow for easy install
• Galvanized steel material
• 2, 4, 8, and 20 ton loading capabilities
• 1 ton universal lifters also available Elevate access opening covers to grade
• Available in rectangular and round shapes
• Elevate access opening covers to grade
• Available in rectangular and round shapes Available in multiple locations to accommodate various connection sizes and elevations
• Round or rectangular shapes available per design specifications
• Knock-outs are easily broken with a hammer for a desired fit
• Available in multiple locations to accommodate various connection sizes and elevations
• Round or rectangular shapes available per design specifications
• Knock-outs are easily broken with a hammer for a desired fit Various designs accommodate coalescing media inserts
• Inserts separate oil further utilizing varying degrees of gravity
• Various designs accommodate coalescing media inserts
• Inserts separate oil further utilizing varying degrees of gravity

Model: GI-3546

Material: Concrete

Measurement System:

Height: 4’ 6”

Width: 3’

Length: 5’

Weight: 8,600 lb

Downloads

PDF: ENV-9-1.pdf

DWG: ENV-9-2.dwg